 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| QUIET POWER RELAY 1 POLE--20 A (FOR AUTOMOTIVE APPLICATIONS) FTR-P1 SERIES s FEATURES Original construction, where reduction of operational noise is considered when mounted on PCB, made it possible to design this quiet relay. (Average acoustic noise level: 53 dB, distance 10 cm) q New types of materials are used for the conductive parts, allowing this compact relay to carry 20 AMP. q Two types of contact material are available for various contact loads. q Wider contact gap (0.6 mm) version is also available for enhanced cut-off ability to overload condition. q s ORDERING INFORMATION [Example] (a) (b) (c) (d) (e) (f) Note: Part No. is printed on the top of relay as follows. (Example) Designation ordered: FTR-P1CN012W1 Stamp: P1CN012W1 NO TF OR DE NE SIG W N FTR-P1 (a) C (b) N 012 W1 (c) (d) (e) -** (f ) Series Name FTR-P1: FTR-P1 Relay C Contact Arrangement : 1 form C (SPDT) Contact Gap N P : 0.3 mm gap : 0.6 mm gap : 9 VDC : 10 VDC : 12 VDC Nominal Voltage 009 010 012 W1 Contact Material : Silver-tin oxide-indium Custom Designation To be assigned for custom specification 1 FTR-P1 SERIES (QUIET TYPE) s SPECIFICATIONS Item Contact Arrangement Material Voltage Drop (resistance) Ratings Maximum Carrying Current Maximum Inrush Current (reference) Max. Switching Current (reference) Min. Switching Load*1 1 form C (SPDT) Silver-tin oxide-indium (W1 type) Maximum 100 mV (at 2 A 12 VDC) 14 VDC/20 A (locked motor load) 14 VDC/inrush 20 A, break 4 A (motor free load) 20 A/ 1 hour (25C, 100% rated coil voltage) W1 Type: 60 A 30 A at 16 VDC 6 VDC 1 A Specifications Coil Time Value Life Other *1 Values when switching a resistive load at normal room temperature and humidity, and in a clean environment. The minimum applicable load varies with the switching frequency and operating environment. s COIL DATA CHART q 0.3 mm contact gap type MODEL NO TF OR DE NE SIG W N (reference) Operating Temperature Range -40C to +85C (no frost) (reter to the CHARACTERISTIC DATA) Storage Temperature Range -40C to +100C (no frost) Operate (at nominal voltage) Maximum 10 ms Release (at nominal voltage) Maximum 5 ms Mechanical Electrical 1 x107 operations minimum 2 x105 operations minimum (locked motor load) 4 x105 operations minimum (motor free load) Vibration Resistance Shock Resistance Weight 10 to 55 Hz (double amplitude of 1.5 mm) Misoperation Endurance 100 m/s2 1,000 m/s 2 Approximately 10.0 g W1 TYPE FTR-P1CN009W1 FTR-P1CN010W1 FTR-P1CN012W1 Nominal voltage 9 VDC 10 VDC 12 VDC Coil resistance (10%) 135 180 240 Must operate voltage 5.4 V (at 20C) 6.8 V (at 85C) 6.3 V (at 20C) 7.9 V (at 85C) 7.3 V (at 20C) 9.2 V (at 85C) Must release voltage 0.7 V 0.8 V 0.9 V 73C/W Thermal resistance 2 FTR-P1 SERIES (QUIET TYPE) q 0.6 mm Contact Gap Type MODEL W1 TYPE FTR-P1CP009W1 FTR-P1CP010W1 FTR-P1CP012W1 Nominal voltage 9 VDC 10 VDC 12 VDC Coil resistance (10%) 100 135 180 Must operate voltage 5.4 V (at 20C) 6.8 V (at 85C) 6.3 V (at 20C) 7.9 V (at 85C) 7.3 V (at 20C) 9.2 V (at 85C) Must release voltage 0.7 V 0.8 V 0.9 V 65C/W Thermal resistance Note: Values in the table of coil resistance and must release voltage are measured at 20C. s SUITABLE APPLICATION CONTACT MATERIAL W1: Silver-tin oxide-indium s CHARACTERISTIC DATA 1. MAXIMUM BREAK CAPACITY Contact switching current (A) Number of operations (x104) NO TF OR DE NE SIG W N SUITABLE LOAD Door lock Power window Solenoids, etc. (locked rotor) 2. LIFE 50 40 35 30 25 20 14 VDC Motor locked load 30 20 10 5 Resistive load 0.3 mm gap Locked motor load 0.3 mm gap 15 0.6 mm gap 0.6 mm gap 12 10 10 10 15 20 25 30 35 40 50 Voltage between contacts (V) 15 20 25 30 35 404550 Locked motor current (A) 3 FTR-P1 SERIES (QUIET TYPE) 3. LIFE TEST (EXAMPLE) * Test item 14 V DC-20 A Motor Lock 200,000 operations minimum * Test circuit RL-1 N.O. N.C. N.O. N.C. RL-2 M * Shift of pick-up drop-out voltage 100 Percent of rated coil voltage (%) 80 60 PICK-UP 40 DROP-OUT 20 0 * Current wave form (RL-1) 20 A 0A (RL-2) 20 A 0A 20 sec 0.3 sec Percent of rated coil voltage (%) * Test item 14 V DC-20 A motor free 400,000 operations minimum * Test circuit NO TF OR DE NE SIG W N Initial 1 10 100 * Shift of contact resistance 1000 Contact Resistance (m) (Measured at 6 V-1 A) 100 Break Make 10 10 sec 0.3 sec Initial 1 10 Number of operations (x104) 100 * Shift of pick-up drop-out voltage 100 80 60 40 20 0 PICK-UP N.O. N.C. DROP-OUT M Initial 1 10 100 * Shift of contact resistance * Current wave form 20 A 4A 0A 16 A Contact Resistance (m) 1000 Break Make (Measured at 6 V-1 A) 100 10 Initial 1 10 Number of operations (x104) 100 4 4. COIL TEMPERATURE RISE 120 100 80 60 40 20 0 6. VIBRATION RESISTANCE CHARACTERISTICS (m/s ) 100 Acceleration 7. SHOCK RESISTANCE CHARACTERISTICS (V) 15 FTR-P1 SERIES (QUIET TYPE) 5. OPERATING COIL VOLTAGE RANGE (EXAMPLE) Coil temperature rise (C) Applied voltage to the coil (2) carrying current : applied coil power 10 A 0.8 W 0.6 W 10 CONTINUOUSLY APPLICABLE COIL VOLTAGE RANGE 2 NO TF OR DE NE SIG W N at 20C 0.8 W 0.6 W (1) carrying current : applied coil power 0 A 5 -30 0 50 100 Operating temperature (C) 0 10 20 30 Applied time (minutes) Dual amplitude (mm) 0.5 0.1 5 1 0.01 50 44 m/s 2 Automotive electronic standard Frequency : 10~2000 Hz Acceleration : 100 m/s2 maximum Vibration direction : see diagram Detection level : chatter of 100 s minimum 10 Range where chattering occurs N.O. contact coil not energized on Z-direction Z 1000 2000 FTR-P1 Y X 10 50 100 500 Frequency (Hz) (m/s2) 1,000 Shock level 800 600 400 200 0 Shock application time : 11 ms, half-sine wave Test material : coil, energized and de-energized Shock direction: see diagram Detection level : chatter of 100 s minimum Y2 Z2 FTR-P1 Z1 X2 X1 Y1 X1 X2 Y1 Y2 Z1 Z2 Shock direction : N.C. contact (coil de-energized) : N.C. contact (coil energized) 5 FTR-P1 SERIES (QUIET TYPE) s REFERENCE DATA Distribution of operate and release voltage 80 FTR-P1 n = 100 60 Operate Release 100 80 Distribution of operate and release time FTR-P1 n = 100 Operate Release Distribution of contact resistance 100 80 FTR-P1 n = 100 Distribution (%) 60 40 20 0 Distribution (%) 8 Distribution (%) 60 40 20 0 40 20 0 0 10 20 30 40 50 60 70 80 Nominal voltage multiplying factor (%) s DIMENSIONS q Dimensions NO TF OR DE NE SIG W N 0 1 2 345 Time (ms) 6 7 0 10 20 30 40 50 60 70 80 Contact resistance (m) P1CP012W1 F&T 9616 21.8+0.2 16.9+0.6 3.5 16.3+0.2 (2.3) (2.45) 12.0 q Mounting hole layout (BOTTOM VIEW) q Schematic (BOTTOM VIEW) N.C. 4 5 1 COM 12.0 5- 1.2 12.2 Tolerance -0.1 2.1 3 N.O. 2 Unit : mm 6 FTR-P1 SERIES (QUIET TYPE) Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@ft.ed.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: www.fceu.fujitsu.com Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #04-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com (c) 2005 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev.06/07/2005 NO TF OR DE NE SIG W N 7 |
Price & Availability of FTR-P1CN009W1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |